- Home
- Equipment
Refine by
Us Resin Environmental Equipment & Supplies
10 equipment items found
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
Tanks are made of 304-2B Stainless Steel. Heliarc & Short Arc Welding processes used with 316 stainless wire. The top and bottom heads are 12 gauge (.105) thicknesses. The side shells are 9 inches in diameter &14 gauge (.078) thickness. The top head has two V* female pipe fittings 3 inches apart on center. The bottom head is inverted allowing for use on hook type trucks. These tanks have ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
Poly Glass Vessels For residential and light commercial water softener/filtration applications.Slim diameter with capacities from 2 to 49 gallons. Unmatched for strength and chemical ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
US Resin’s C-8 Na resin is a high-capacity, conventional gel polystyrene strong acid cation exchange resin designed for use in residential or industrial water softening equipment. Cation resin in sodium form removes hardness ions such as calcium and magnesium by replacing them with sodium. When the resin bed is exhausted the hardness ions begin to pass through the bed. Functionality is ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
Our high output, wall mounted tanks provide approximately 300 gallons of mineral free, de-ionized water. This di water, spot free rinse system consists of two 20 inch tubes that include replaceable and refillable cartridges which slide in and out of the water tight housings. This unit is designed to be mounted on the wall and comes with pre-drilled mounting holes. Deionized Water Rinsing System ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
Our resin replacement cartridges are easy to install, taking only 5 minutes to replace. You will receive two 20-inch replacement cartridges which are rated to de-ionize approximately 300 gallons of water. Resin Replacement Cartridges - Includes two 20-replacement ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
Buying replacement resin in pre-measured bags to refill your reusable 20' cartridges can save you money! These replacement bags of resin are easy to install and virtually hassle free. You will receive enough replacement resin to de-ionize approximately 300 gallons of water. Replacement Resin - 4.5 ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
The SM-Model Softener is compact, portable & durable. It is a down-flow design with no moving parts. The tank is constructed of T-304 stainless steel. Top and bottom heads are mig welded using a semi automated Circumference welder. The vertical seam weld is done by heliarc on a semi automated seam welder. Fittings are welded by hand using the heliarc process. The top has two openings: one ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
The SS-Model Softener is compact and portable. It is s down-flow design with no moving parts. The tank is constructed of T-304 stainless steel of low carbon content with heli-arc welded top and bottom and fusion seam-welded shell. The top has three openings: one 1 1/2” threaded hole for filling the tanks and two 1” threaded holes in the top of the inlet and outlet tank ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
Part # 00-04-052. Tank Fittings ; 1-1/2" Zinc Fill Plug and 1-1/2" Brass Cap. Quantity ; ...
Manufactured by:United States Resin Company based inClinton, WISCONSIN (USA)
US Resin’s A-S1 (OH) resin is a high-capacity Type I strong base anion exchange resin specially designed for use in commercial or industrial demineralized water equipment. The resin removes all anion ions such as sulfate, chloride, bicarbonate, and silica, by replacing them with hydroxide ions. When the resin bed is exhausted the weakest anions (such as silica) begin to pass through the ...